Go to main menue    Page 3   

Wildlife Sculptures

How to make a .17 hmr Rifle Stock from fibre-glass.

7hmr17.jpg (43667 bytes) Casting the .17hmr rifle stock ?
8hmr17.jpg (22068 bytes) The Stock straight out of the mould.
9hmr17.jpg (41245 bytes) To get the action fitted you need to use the original stock to take off a pattern.
10hmr17.jpg (34502 bytes) Use plastercine or modelling clay to build a dam system.
11hmr17.jpg (30805 bytes) Silicone rubber is built up a 1/4" thick.
12hmr17.jpg (26085 bytes) Ready for the fibreglass.

Page1 <<<<<<<Pg2 <<< Next  Pg4 >>> Pg5 >>> Pg6 >>> Pg7


Website:    http://www.wildlifesculptures.co.nz/